1. Enable the Web Interface on your Polycom RealPresence Trio Device

If a Polycom RealPresence Trio 8800 is purchased in LYNC base profile mode the Web Interface is automatically disabled for security reasons.

The Interface can be manually enabled but Polycom strongly recommends to change the default Admin Password as shown => here <=

Option 1 - Change web interface settings via device:

In order to enable the HTTP or HTTPS Web Interface on the phone please go ahead as follows:

STEP 1:
Press Settings Key

STEP 2:
Select Advanced

STEP 3:
Enter the Admin Password (default 456)

STEP 4:
Select Administration Setting

STEP 5:
Scroll down 

STEP 6:
Select Web Server Configuration

STEP 7:
Enable Web Server. Web Config Mode "should" be HTTPS only for added security

Option 2 - Update via Provisioning Server:

Simply provision the feature from the provisioning server:

 <PHONE_LOCAL
               httpd.cfg.enabled="1"
               httpd.cfg.secureTunnelRequired="1"
               httpd.enabled="1"
        />

  Above configuration and the attached file set HTTPS only